Watchguard Wireless Router User's Guide Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 254
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Making Static Routes
User Guide 63
than one computer to the optional interface, use a 10/100 BaseT
Ethernet hub or switch with RJ-45 connectors. It is not necessary for
the computers on the optional network to use the same operating
system.
To add more than one computer to the optional network:
1 Make sure that each computer has a functional Ethernet card.
2 Set each computer to use DHCP. For more information, see
“Setting Your Computer to Connect to the Edge” on page 22.
3 Connect each computer to the network. Use the procedure
“Connecting the Edge to more than seven devices” on page 20.
4 Restart each computer.
Making Static Routes
You can configure the Firebox to send traffic to networks that are
behind routers on your trusted network by adding static routes to
these networks. Use the Routes page to make a static route:
1 To connect to the System Status page, type https:// in the
browser address bar, followed by the IP address of the Edge
trusted interface.
The default URL is: https://192.168.111.1
2 From the navigation bar, select Network > Routes.
The Routes page appears.
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 253 254

Comments to this Manuals

No comments