Watchguard Wireless Router User's Guide download pdf (Page 97)

Setting up the Wireless Access Point

User Guide 83

2 If you typed more than one key, click the key to use as the

default key from the Key Index drop-down list.

The Firebox X Edge can use only one key at a time. If you select a key

other than the first key in the list, you must also set your wireless client

to use the same key number.

Shared key authentication

Encryption options for shared key authentication are WEP 64 bit

hexadecimal, WEP 40 bit ASCII, WEP 128 bit hexadecimal, and

WEP 128 bit ASCII.

1 If you use WEP encryption, type hexadecimal or ASCII characters

in the Key text boxes.

You can have a maximum of four keys that the wireless network uses for

connections.

- A WEP 64-bit hexadecimal key must have 10 hexadecimal (0-F)

characters.

- A WEP 40-bit ASCII key must have 5 characters.

- A WEP 128-bit hexadecimal key must have 26 hexadecimal characters

(0-F).

- A WEP 128-bit ASCII key must have 13 characters.

2 If you typed more than one key, click the key you want to use as

the default key from the Key Index drop-down list.

WPA-PSK authentication

The encryption options for WPA-PSK authentication are TKIP and

AES. WPA-PSK only operates correctly if you are using Windows XP

Service Pack 2 or higher.

Click Auto to select the encryption algorithm.

Configuring wireless clients to use MUVPN

To make wireless computers authenticate as MUVPN clients:

1 To connect to the System Status page, type https:// in the

browser address bar, and the IP address of the Edge trusted

interface.

The default URL is: https://192.168.111.1.

2 From the navigation bar, select Network > Wireless.

3 Select the check box Require encrypted MUVPN connections

for wireless clients.

4 Click Submit.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 253 254

No comments

Watchguard Wireless Router User's Guide Page 97